How to choose a location for a bar

Bars depend on nightlife streets, licenses and neighbors who tolerate noise. In many places the liquor license, not the rent, decides where you can open.

Updated November 18, 2026 · Practical advice plus public data for 131 U.S. cities and counties.

2,000 sq fttypical space used for rent estimates
32%of the demand estimate comes from street activity
43,111competing places in our data, 131 cities and counties
Garland#1 city by residents per bar

Who your customers are

After-work crowds, groups of friends at night and on weekends, sports fans and tourists. Bars usually benefit from being near other bars and restaurants, because people go out to an area and move between places.

What makes a good location for a bar

For a bar, the strongest demand signal is busy commercial streets where people already go to shop and eat (32% of the demand estimate), followed by commuter flow — people walking to and from nearby transit stations (20%). Demand is then weighed against competing businesses within about 400 m.

Street activity32%
Transit riders20%
Household income20%
Residents nearby16%
Daytime workers12%

Share of each factor in the demand estimate for this business type. Typical space: 2,000 sq ft (≈ 186 m²). How the score works →

What to look for in a site

Red flags

Competition: how close is too close?

For bars, a few competitors nearby are usually not a bad sign. Customers often go where the choices are, so a street with several bars can draw more people than a lonely corner. The risk is opening with the same concept and price as the place next door, so make sure you offer something the street doesn't have yet.

When we score a location for a bar, these kinds of places within about 400 m count as competitors: Bar, Beer bar, Beer garden, Brewery, Cocktail bar, Dive bar, Gastropub, Hookah bar, Irish pub, Lounge, Pub, Speakeasy, Sports bar, Tapas bar, Wine bar. Places marked as permanently closed are not counted — they are shown separately on the map.

The space and build-out

Food businesses are expensive to build. A second-generation restaurant space, one that already has a kitchen hood, grease interceptor, gas line and enough electrical capacity, can save a large part of the build-out budget and months of permitting. Ask the landlord in writing what stays (hood, walk-in cooler, grease trap, fire suppression), confirm that exhaust can be legally vented, and check that the space has, or can get, a certificate of occupancy for food service.

What rent costs for a bar

Commercial rent in the U.S. is usually quoted in dollars per square foot per year. For a monthly figure, multiply by the size and divide by 12: a 2,000 sq ft space at $40 per sq ft costs about $6,667 a month in base rent. Under a triple-net (NNN) lease you also pay a share of property taxes, insurance and common-area maintenance (CAM) on top.

CityTypical rentEst. monthly, 2,000 sq ft
New York City, NY$48/sq ft/yr≈ $8,000Best areas →
Los Angeles, CA$39/sq ft/yr≈ $6,450Best areas →
Chicago, IL$24/sq ft/yr≈ $4,000Best areas →
Houston, TX$26/sq ft/yr≈ $4,350Best areas →
Phoenix, AZ$28/sq ft/yr≈ $4,750Best areas →
Philadelphia, PA$23/sq ft/yr≈ $3,900Best areas →
San Antonio, TX$25/sq ft/yr≈ $4,200Best areas →
San Diego, CA$38/sq ft/yr≈ $6,300Best areas →
Dallas, TX$27/sq ft/yr≈ $4,450Best areas →
San Jose, CA$33/sq ft/yr≈ $5,550Best areas →

Median estimated asking rent across the commercial zones of each city, from published broker reports and listing averages. Prime streets cost more and side streets less. Estimates, not quotes.

Permits and licenses

You will need a state liquor license (types and costs vary widely, and some states cap the number of licenses), often local approval or a public hearing, a certificate of occupancy for assembly use if capacity is large, and a health permit if you serve food. Apply early: licensing can take months, and some leases are signed contingent on getting the license.

Rules vary by state, county and city, and they change. Confirm the requirements for your address with your local small business office or licensing agency before you sign a lease. This is general information, not legal advice.

Best U.S. cities to open a bar

A simple way to compare cities is residents per existing bar: more people per business usually means more room for a newcomer. These are the leaders among the 131 cities and counties we compare.

#CityResidents per businessCompetitors
1Garland, TX9,46926Best areas →
2Fremont, CA9,22025Best areas →
3Hialeah, FL8,26327Best areas →
4Irvine, CA7,50441Best areas →
5North Las Vegas, NV5,58647Best areas →
6Stockton, CA5,53158Best areas →
7Chula Vista, CA5,51050Best areas →
8Chesapeake, VA5,19648Best areas →
9Louisville, KY4,70582Best areas →
10Riverside, CA4,70167Best areas →

Residents: 2020 U.S. Census. Competitors: Overture Maps places, whose coverage varies by city. A low ratio is not always bad: it can signal strong demand.

Full ranking of 131 cities →

Best areas for a bar in the largest cities

The highest-scoring area of each city, ranked by its best zone. Scores are relative within a city, so compare areas inside one city rather than across cities.

Checklist before you sign a lease

Find the best blocks for a bar

BizChecker scores every zone of 131 U.S. cities and counties for a bar: foot traffic, residents, workers, income, competitors, closed businesses and rent estimates on one map, with a PDF report for any spot.

Check a location → Compare cities

Questions

What is the best location for a bar?
After-work crowds, groups of friends at night and on weekends, sports fans and tourists. Bars usually benefit from being near other bars and restaurants, because people go out to an area and move between places. For a bar, the strongest demand signal is busy commercial streets where people already go to shop and eat (32% of the demand estimate), followed by commuter flow — people walking to and from nearby transit stations (20%). Demand is then weighed against competing businesses within about 400 m.
How much space does a bar need?
BizChecker uses about 2,000 sq ft (≈ 186 m²) as a typical size for a bar when it estimates rent. The space you need depends on your format: seating, storage, equipment, kitchen or treatment rooms.
How much does it cost to rent a space for a bar?
For a 2,000 sq ft space, estimated median asking rent ranges from about $3,900 a month in Philadelphia to about $8,000 in New York City, among the largest U.S. cities we cover. That is base rent before property taxes, insurance and common-area charges, and prime streets cost more.
Which U.S. city has the least competition for a bar?
Among the 131 cities and counties we compare, Garland, TX has the most residents per existing bar: about 9,469 people for each of its 26 bars. Fremont, CA and Hialeah, FL follow.
Is it a good idea to open a bar near competitors?
For bars, a few competitors nearby are usually not a bad sign. Customers often go where the choices are, so a street with several bars can draw more people than a lonely corner. The risk is opening with the same concept and price as the place next door, so make sure you offer something the street doesn't have yet.
What permits do I need to open a bar?
You will need a state liquor license (types and costs vary widely, and some states cap the number of licenses), often local approval or a public hearing, a certificate of occupancy for assembly use if capacity is large, and a health permit if you serve food. Apply early: licensing can take months, and some leases are signed contingent on getting the license.

More location guides

Data: U.S. Census Bureau (2020 Census, American Community Survey 5-year), LEHD LODES, Overture Maps Foundation places (© Overture Maps Foundation, CDLA-Permissive-2.0), NYC Open Data and MTA ridership for New York City, published broker rent reports. This product uses the Census Bureau Data API but is not endorsed or certified by the Census Bureau. General information, not legal, financial or real-estate advice. How the score works →